How do I confirm the correct bore size and ply rating before ordering blast hose?

Match hose inner diameter to your nozzle bore and machine output — undersized hose restricts airflow and causes pressure drop. For ply rating, use 1-ply for light duty, 2-ply for general industrial blasting, and 4-ply for heavy continuous use. Share your nozzle ID, compressor CFM, working pressure, and hose length and our team will confirm the right specification before you place an order.

What working pressure and CFM should my sand blasting hose handle?

Standard abrasive blasting hose is typically rated for 10–12 bar (150–175 psi) working pressure. CFM demand depends on nozzle size and blast pressure — a 1/2" nozzle at 90 psi may need 175+ CFM. Always select hose rated above your maximum operating pressure and ensure your compressor and blast pot can sustain the required airflow without starving the nozzle.

Are couplings and end fittings included with the hose or sold separately?

Blast hose can be supplied bare (cut length only) or with couplings pre-fitted at one or both ends. Screw-type, quick-connect, and flange fittings are available to match your blast pot, nozzle holder, and machine connections. Mention your existing coupling type or share a photo when requesting a quote so we supply compatible fittings.

What is the typical lead time for sand blasting hose and spare parts?

Standard bore sizes and common spare parts are usually ready for dispatch within a few working days from our Jodhpur facility. Custom lengths, special fittings, or bulk export orders may need additional lead time. Share quantity, specifications, and delivery location when enquiring and we will confirm availability and dispatch schedule.

Can I order custom hose lengths with pre-fitted couplings?

Yes. We cut blast hose to your required length and fit end couplings in-house — screw-type, quick-connect, and flange options are available. Custom assemblies reduce on-site cutting and eliminate mismatched connections between hose, holder, and blast pot. Specify total length, coupling type at each end, and quantity when ordering.

How should I store and maintain abrasive blasting hose?

Store hose coiled in a cool, dry area away from direct sunlight, oil, and solvents. Avoid sharp bends, kinks, and dragging on abrasive surfaces during use. Inspect the outer cover and couplings regularly; replace hose when wall thickness wears thin or bulging appears. Proper care extends service life to hundreds of blasting hours on quality 2-ply hose.

Do you offer bulk pricing for contractors, fabricators, and resellers?

Yes. We offer competitive volume pricing on sand blasting hose, shot blasting hose, nozzles, couplings, and spare parts for contractors, shipyards, fabrication shops, and distributors. Share your monthly or project-based quantity, product specifications, and delivery location for a tailored quote with bulk rates and repeat-order support.

What details should I include in a product enquiry or quote request?

For hose, mention bore size, ply rating, length, quantity, and whether couplings are required. For spare parts, share machine model, part name, or a photo of the component. Include delivery city or country, intended application, and contact details. The more specific your enquiry, the faster we can respond with accurate pricing and lead time.

Moisture Separator Price: Manufacturers, & Types, Uses, Benefits

Introduction of Moisture Separator

5.0 (19 reviews)

Price range ₹2,500 – ₹18,000

Quality Moisture Separator for sand blasting and abrasive blasting systems — supplied and exported worldwide.

Removes moisture and oil from compressed air supply
Protects blast pots, valves, nozzles, and hoses
Inline and vessel-type separators for plant and portable use
Manual drain and auto-drain options available
Export-ready moisture separators and air prep kits

In-House Supply

Global Export

Quick Quote

Product Name	Moisture Separator
Price Range	₹2,500 – ₹18,000
Product Type	Compressed air moisture and condensate removal device
Also Known As	Water separator, air dryer separator, condensate separator, moisture trap
Function	Separates liquid water and oil from compressed air stream
Design Types	Inline separator, cyclonic separator, filter-separator combo
Port Size	1/4″ to 2″ and larger; matched to compressor and pot lines
Working Pressure	Rated for typical shop air and blast pot operating pressure
Flow Capacity	Sized to compressor CFM and simultaneous blast demand
Drain Type	Manual drain valve, float drain, or auto drain on request
Body Material	Aluminum, steel, or application-matched construction
Filtration Stage	Can be paired with coalescing filter for finer oil removal
Compatibility	Blast pots, cabinets, dust collectors, pneumatic tool lines
Maintenance	Drain condensate regularly; replace filter elements when specified
Applications	Portable blasting, blast rooms, workshops, industrial air prep
Supply Scope	Domestic India supply and worldwide export packing
Key Features	Cleaner air, fewer clogs, longer valve life, easy maintenance

Product Name

Moisture Separator

Price Range

₹2,500 – ₹18,000

Product Type

Compressed air moisture and condensate removal device

Also Known As

Water separator, air dryer separator, condensate separator, moisture trap

Function

Separates liquid water and oil from compressed air stream

Design Types

Inline separator, cyclonic separator, filter-separator combo

Port Size

1/4″ to 2″ and larger; matched to compressor and pot lines

Working Pressure

Rated for typical shop air and blast pot operating pressure

Flow Capacity

Sized to compressor CFM and simultaneous blast demand

Drain Type

Manual drain valve, float drain, or auto drain on request

Body Material

Aluminum, steel, or application-matched construction

Filtration Stage

Can be paired with coalescing filter for finer oil removal

Compatibility

Blast pots, cabinets, dust collectors, pneumatic tool lines

Maintenance

Drain condensate regularly; replace filter elements when specified

Applications

Portable blasting, blast rooms, workshops, industrial air prep

Supply Scope

Domestic India supply and worldwide export packing

Key Features

Cleaner air, fewer clogs, longer valve life, easy maintenance

What Is a Moisture Separator?

A moisture separator is a compressed air accessory that removes liquid water and often oil aerosols from the air stream before it reaches blasting equipment. Wet air causes abrasive clumping, valve sticking, sand blasting hose damage, and poor blast consistency.

A Moisture Separator for Sand Blasting Machine is installed downstream of the sand blasting air compressor and upstream of regulators, pots, and control valves. Proper air drying at this stage is one of the most cost-effective maintenance steps on any blasting site.

How Does a Moisture Separator Work?

Compressed air enters the separator where velocity changes, cyclonic action, or filter media cause water droplets to coalesce and fall into a collection bowl. Condensate is drained manually or automatically while dried air continues to the blast circuit.

Regular draining is critical; full bowls lose efficiency and allow moisture carryover. Replacing filter elements when specified keeps air line water separators effective through humid seasons and long shifts.

Types of Moisture Separators

Separator selection depends on flow rate, pressure, installation space, and whether oil removal is also required.

Inline Moisture Separator

A compact unit for pot-mounted or hose-line air prep.

Inline Separator Advantages

Easy to install on portable sand blasting machine setups
Low footprint for field and workshop use
Cost-effective first stage of air cleaning
Compatible with standard air fittings

Cyclonic / Vessel-Type Separator

Handles higher CFM for blast rooms and central plant air mains.

Cyclonic Separator Benefits

High moisture removal capacity for large compressors
Suitable for multi-pot and sand blasting room blasting layouts
Durable for continuous industrial operation
Often paired with aftercoolers and filters

Filter-Separator Combinations

Combine moisture knock-out with coalescing filtration for finer oil and particle removal.

Common Applications of Filter-Separators

Pneumatic control panels on automated blast lines
Dust collector pulse air supply protection
Coating prep areas requiring cleaner instrument air
Export packages with regulator and filter-regulator sets

Benefits of Using a Quality Moisture Separator

Dryer abrasive flow: Reduces clumping and inconsistent blast streams.
Valve protection: Less sticking and corrosion in solenoids and remote valves.
Longer hose life: Minimizes internal damage from water hammer and moisture.
Better finish: Stable air supports uniform cleaning and coating prep.
Lower downtime: Fewer blockages and freeze-related stoppages in cold climates.

Moisture Separator for Sand Blasting Air Supply

Every sand blasting installation benefits from compressed air preparation. A moisture separator installed with regulators and filters forms the foundation of reliable pot operation, especially on portable jobs and humid sites. We supply moisture separators for pots, rooms, and plant air mains from India.

Moisture Separator Price

Looking for the best Moisture Separator price? We offer high-quality moisture separators at competitive prices for sand blasting applications. Designed to remove moisture and contaminants from compressed air, our separators ensure improved blasting efficiency, longer equipment life, and reliable performance. Contact us today for the latest moisture separator price and customized quotation.

Choosing Reliable Moisture Separator Manufacturers

Consider flow capacity, port size, drain type, pressure rating, and whether coalescing filtration is needed. Undersized separators allow moisture carryover; oversized units add unnecessary cost.

Recognized as a reliable Moisture Separator manufacturer in India, we deliver premium-grade sand blasting equipment and replacement components to clients across domestic and international markets. Our comprehensive product range includes sand blasting hoses, abrasive blasting hoses, grit blasting hoses, deadman hoses, rubber blasting hoses, abrasive blasting hose couplings, remote control valves, mixing tubes, pinch valves, sand blasting helmets, and various other blasting accessories. With a strong emphasis on quality, durability, and operational efficiency, we manufacture products designed to provide consistent performance and long-lasting reliability for industrial surface preparation and abrasive blasting applications worldwide.

Importance of Trusted Moisture Separator Suppliers

Trusted suppliers help with CFM sizing, kit assembly with regulators and hoses, maintenance schedules, and export packing for field air prep packages.

We supply moisture separators with solenoid valves, air filter regulators, blast hose, and related spare parts from India. Request a quote for moisture separator supply today — share CFM, port size, quantity, and delivery location.

Moisture Separator — Product FAQs

Common questions about Moisture Separator — fitment, specifications, pan-India supply, export options, and how to get pricing.

Hose Sizing & Pressure

India & Export Delivery

Spare Parts & Fittings

Quotes & Pricing