2 inch Blast Hose

Manufacturer, Supplier & Exporter

Spare Part / Hose Export Ready
2 inch Blast Hose
Available in Stock Ready for dispatch · Domestic & export

Introduction of 2 inch Blast Hose

Price range ₹1,200 – ₹8,500 / Meter

2 inch Blast Hose (50 mm bore) is the largest common portable blast line for maximum CFM delivery to big-bore nozzles on industrial sand, grit, and shot blasting systems. Built for heavy continuous duty with reinforced plies and a wear-resistant inner tube.

  • 2″ (50 mm bore) for abrasive blasting lines
  • Abrasion-resistant inner tube for demanding abrasive media
  • Textile-reinforced construction for burst resistance
  • Matched couplings and nozzle-holder compatibility
  • Export-ready 2 inch blast hose and assemblies
In-House Supply
Global Export
Quick Quote
Request Quote +918690066649
+918690066649 info@sandblastinghose.in
Product Specifications

Key technical and supply information for this product.

Product Name 2 inch Blast Hose
Price Range ₹1,200 – ₹8,500 / Meter
Product Type Abrasive-resistant blast hose
Also Known As 50 mm blast hose, 2 inch sandblast hose, 2″ abrasive blast hose
Inside Diameter (ID) 2 inch (50 mm)
Outside Diameter (OD) Matched to 2″ industrial blast hose standards; confirm on quote
Tube Material Natural rubber or SBR with high abrasion resistance
Reinforcement Multi-ply textile braid
Cover Material Weather- and abrasion-resistant rubber cover
Length Options Standard 10 m, 15 m, 20 m rolls; custom cut lengths
Working Pressure Matched to portable pot rating — commonly up to 10 bar
Media Handled Sand, grit, garnet, glass beads, light steel grit applications
Coupling Compatibility Standard 2″ blast hose couplings and clamps
Nozzle Match Suitable for large venturi and production nozzle setups on 2″ lines
Typical Use Large industrial pots, blast rooms, shipyards, heavy fabrication and descaling
Maintenance Inspect for tube wear; replace when abrasion exposes reinforcement
Supply Scope Domestic India supply and worldwide export packing
Key Features Popular 2″ size, flexible, abrasion resistant, easy coupling fitment
Applications

Industries and use cases where this product is commonly applied.

2 inch blast hose is specified for the highest CFM abrasive blasting circuits where smaller bore hose restricts nozzle performance.

  • Large Industrial Blast Pots: 2″ primary media lines for maximum production blasting.
  • Blast Rooms & Fixed Installations: Feed hose from pot or receiver to multiple operator stations.
  • Shipyard & Heavy Descaling: High-volume sand and grit transfer on large steel structures.
  • Export Spare Kits: Stock 50 mm hose with 2″ couplings for plant and fleet programs.
Product Details

Overview and full description for this product.

What Is 2 inch Blast Hose?

2 inch blast hose — also written as 2″ blast hose or 50 mm blast hose — is a key bore size for maximum-CFM industrial blasting, large portable pots, blast rooms, and production surface prep. It carries abrasive media and compressed air from the pot to the nozzle with reliable transfer and matched end fittings.

2 inch Blast Hose for Blasting Machine uses an abrasion-resistant inner tube and reinforced plies sized specifically for 50 mm ID couplings and standard blast pot outlets.

How Does 2 inch Blast Hose Work?

Compressed air from the blast pot pushes abrasive media through the 2″ bore toward the nozzle. The 2″ bore supports the highest media and air volumes in the portable hose range, reducing starvation on large nozzles and long feed lines. The inner tube must resist scouring from abrasive particles; reinforcement plies prevent expansion under pressure.

Worn 2″ hose reduces blast efficiency and increases coupling leak risk. Replacing worn 50 mm blast hose sections restores pressure and safe operation.

Types of 2 inch Blast Hose

Even within the 2″ bore size, hose grade and assembly options vary by media, pressure, and duty cycle.

Standard 2 inch Rubber Blast Hose

The everyday choice for portable pots and workshop blasting.

Standard 2″ Hose Advantages

  • Popular bore matched to many portable and industrial pot kits
  • Flexible routing for contractor and workshop blasting
  • Compatible with standard 2″ couplings and clamps
  • Cost-effective spare for routine maintenance programs

Heavy-Duty 2 inch Abrasion Resistant Hose

Selected when 2″ bore is required but wear life must be maximized.

Heavy-Duty 2″ Hose Benefits

  • Thicker abrasion-resistant tube for longer service life
  • Extra reinforcement plies for demanding grit and garnet duty
  • Suitable for contractor crews on multi-shift jobs
  • Reduces replacement frequency on aggressive media

2 inch Pre-Assembled Hose Kits

Supplied with pot-end and nozzle-end couplings for fast installation.

Common Applications of 2″ Hose Assemblies

  • Complete portable pot hose kits with matched 2″ fittings
  • Replacement lines for imported 50 mm blast pot circuits
  • Export spare packs with couplings and clamps
  • Custom lengths for specific job site layouts

Benefits of Using Quality 2 inch Blast Hose

  • Correct bore size: Matched 2″ ID supports proper air and media flow.
  • Stable blasting: Reduces pressure drop and nozzle starvation on demanding jobs.
  • Coupling compatibility: Fits standard 2″ blast hose fittings.
  • Durable construction: Abrasion-resistant tube and reinforced plies for industrial duty.
  • Fast replacement: Readily available size for maintenance and export programs.

2 inch Blast Hose for Portable Blasting

For many abrasive blasting contractors and workshops, 2 inch blast hose is a core line from pot to nozzle. It pairs with 2″ couplings, nozzle holders, remote controls, and pinch valves for a complete portable blasting circuit. We also supply 1-1/2″, custom bore and custom bore blast hose from India.

Choosing Reliable 2 inch Blast Hose Manufacturers

Confirm true 50 mm ID, tube abrasion grade, reinforcement type, working pressure rating, and coupling compatibility with your pot and nozzle. A reliable manufacturer helps verify that 2″ hose matches your compressor CFM and media type.

Importance of Trusted 2 inch Blast Hose Suppliers

Experienced suppliers assist with bore verification, length selection, 2″ coupling matching, cut-to-length service, and export packing for project and fleet programs.

We supply 2 inch blast hose with couplings, nozzles, nozzle holders, and related spare parts from India. Request a quote for 2 inch blast hose supply today — share length, coupling type, quantity, and delivery location.

Related Products

You May Also Need

Compatible items from the same sand blasting hose range — ready for supply across India and export worldwide.

Browse All sand blasting hose
Conductive Blast Hose
sand blasting hose Export

Conductive Blast Hose

Conductive Blast Hose is an anti-static abrasive blast hose designed to safely dissipate static electricity generated by high-velocity sand, grit, and shot transfer. Built with a conductive rubber tube or conductive path through the hose wall, it helps reduce static build-up risk on industrial blasting sites while retaining abrasion resistance and reinforced pressure strength.

View Product Get Quote
1-1/4 inch Blast Hose
sand blasting hose Export

1-1/4 inch Blast Hose

1-1/4 inch Blast Hose (32 mm bore) is a heavy-duty abrasive line for industrial sand, grit, and shot transfer on larger portable pots and fixed blasting circuits. Reinforced rubber construction supports higher media volume and CFM to larger nozzles.

View Product Get Quote
1-1/2 inch Blast Hose
sand blasting hose Export

1-1/2 inch Blast Hose

1-1/2 inch Blast Hose (38 mm bore) is designed for high-throughput sand, grit, and shot blasting on industrial pots and demanding contractor applications. Multi-ply reinforcement and an abrasion-resistant tube support continuous use with larger nozzles and higher CFM compressors.

View Product Get Quote
Quality Assured Supply
Export Documentation
Quick Quote Support
Manufacturer, Supplier & Exporter

Ready for a Quote on Machines, Spare Parts or Hose?

Share your specifications — our team provides pricing, technical guidance, and export support for domestic and international buyers.

Request a Quote

Share your requirement — we respond within 24 business hours.

Your details are confidential and used only to respond to your enquiry.

Help Center

2 inch Blast Hose — Product FAQs

Common questions about 2 inch Blast Hose — specifications, compatibility, delivery across India, export support, and how to request a quote.

  • Hose Sizing & Pressure
  • India & Export Delivery
  • Spare Parts & Fittings
  • Quotes & Pricing
8+ Common Questions
24 Hours Response Time
Common Questions

Quick answers to help you choose the right blasting hose and accessories.

8 FAQs

Match hose inner diameter to your nozzle bore and machine output — undersized hose restricts airflow and causes pressure drop. For ply rating, use 1-ply for light duty, 2-ply for general industrial blasting, and 4-ply for heavy continuous use. Share your nozzle ID, compressor CFM, working pressure, and hose length and our team will confirm the right specification before you place an order.

Standard abrasive blasting hose is typically rated for 10–12 bar (150–175 psi) working pressure. CFM demand depends on nozzle size and blast pressure — a 1/2" nozzle at 90 psi may need 175+ CFM. Always select hose rated above your maximum operating pressure and ensure your compressor and blast pot can sustain the required airflow without starving the nozzle.

Blast hose can be supplied bare (cut length only) or with couplings pre-fitted at one or both ends. Screw-type, quick-connect, and flange fittings are available to match your blast pot, nozzle holder, and machine connections. Mention your existing coupling type or share a photo when requesting a quote so we supply compatible fittings.

Standard bore sizes and common spare parts are usually ready for dispatch within a few working days from our Jodhpur facility. Custom lengths, special fittings, or bulk export orders may need additional lead time. Share quantity, specifications, and delivery location when enquiring and we will confirm availability and dispatch schedule.

Yes. We cut blast hose to your required length and fit end couplings in-house — screw-type, quick-connect, and flange options are available. Custom assemblies reduce on-site cutting and eliminate mismatched connections between hose, holder, and blast pot. Specify total length, coupling type at each end, and quantity when ordering.

Store hose coiled in a cool, dry area away from direct sunlight, oil, and solvents. Avoid sharp bends, kinks, and dragging on abrasive surfaces during use. Inspect the outer cover and couplings regularly; replace hose when wall thickness wears thin or bulging appears. Proper care extends service life to hundreds of blasting hours on quality 2-ply hose.

Yes. We offer competitive volume pricing on sand blasting hose, shot blasting hose, nozzles, couplings, and spare parts for contractors, shipyards, fabrication shops, and distributors. Share your monthly or project-based quantity, product specifications, and delivery location for a tailored quote with bulk rates and repeat-order support.

For hose, mention bore size, ply rating, length, quantity, and whether couplings are required. For spare parts, share machine model, part name, or a photo of the component. Include delivery city or country, intended application, and contact details. The more specific your enquiry, the faster we can respond with accurate pricing and lead time.